Injector Dynamics 14mm Top O-Ring

Exergy 0-2200 Bar (32000 PSI) Rail Pressure Sensor

A convenient and comprehensive solution to rebuilding a leaking or worn out fuel tap

A convenient and comprehensive solution to rebuilding a leaking or worn out fuel tap

A convenient and comprehensive solution to rebuilding a leaking or worn out fuel tap

Walbro Multi Point Pick-Up

1/2" Draw Tube Kit, Fits all Dodge modules and Open Tanks for 200GPH DuramaxInstallation InstructionsCatalogCatalog

including hoses, fittings, filters, and wiring harnesses to meet your fuel system needs, even when the vehicle may require a more customized installation solution. Full line of accessories: Filters, Wire...

including hoses, fittings, filters, and wiring harnesses to meet your fuel system needs, even when the vehicle may require a more customized installation solution. Full line of accessories: Filters, Wire...

including hoses, fittings, filters, and wiring harnesses to meet your fuel system needs, even when the vehicle may require a more customized installation solution. Full line of accessories: Filters, Wire...

Exergy 11-19 Ford Power Stroke 6.7L Improved Stock Inlet Metering Valve (FCA/MPROP)

Exergy 07.5-12 Dodge Cummins 6.7L Inlet Metering Valve (FCA/MPROP)

Exergy 11-16 Chevrolet Duramax 6.6L LML Improved Stock Inlet Metering Valve (FCA/MPROP)

DDP 89-93 Dodge Cummins 5.9L 12V VE Pump Upgraded Fuel Pin

DDP 94-98 Dodge Cummins 5.9L 12V P-7100 OEM Overflow Valve

A high flow fuel pressure regulator with a built-in fuel pulse damper. Regulator is ideal for pumps that flow from 100 to 1,400 liters per hour. Universal application. E85 compatible.

Stainless steel lift pump support brackets for Radium Fuel Cell Surge Tanks (FCST). Depth suitable for Radium 14 galllon R14A fuel cells.

Radium Engineering Nissan Skyline G37 Q50 Q60 Early Model Fuel Level Adapter

This kit is needed when using Radium in-tank fuel pump hangers on any 2015-2021 Subaru WRX with the FA20 engine.

Stainless steel construction. Compatible with all fuel types. 5-bolt SAE standard pattern. 0-ohm empty, 90-ohm full.

Stainless steel fuel level sender for Radium fuel cells. 8" long. Suitable for Radium 6 gallon, 10 gallon and spare tire fuel cells.

Polycarbonate and aluminum access cover is installed over the fuel pump module area in the 1989-97 Mazda Miata MX-5. This decorative cover provides a clear view of the fuel pump...

Aluminum fuel pump access cover for the 2008-2015 Cadillac CTS(all). Requires drilling/cutting for installation. See website for more details.

Attaches to specific fuel pump outlet barbs. Integrated check valve. 10mm Hose barb male connection. See www.radiumauto.com for more information.

Fuel pulse damper for EFI fuel systems. Screws into a female 8AN ORB port (such as on a fuel rail). Damper body swivels after installation. Compatible with all fuels.

Fuel pulse damper for EFI fuel systems. Screws into a female 8AN ORB port (such as on a fuel rail). Damper body swivels after installation. Compatible with all fuels.

Fuel level sender with 0 (empty) to 90 (full) ohm output. 11.7" (297mm) probe length. Compatible with all fuel types. Output is in approximately 10 ohm increments. Designed for use...

Replaces the OEM fuel pump access cover underneath the rear seat. Transparent with Radium logos.

Replaces the OEM fuel pump access cover underneath the rear seat. Transparent with Radium logos.

Injector Dynamics O-Ring/Seal Service Kit for Injector w/ 11mm Top Adapter and Denso Lower Cushion

Injector Dynamics O-Ring/Seal Service Kit for Injector w/ 11mm Top Adapter and WRX Bottom Adapter.

Injector Dynamics O-Ring/Seal Service Kit for Injector w/ 11mm Top Adapter and WRX Bottom Adapter

Injector Dynamics Metal Clip for ID Adapter Tops

Injector Dynamics 11mm Top O-Ring (for ID Adapter Tops)

Injector Dynamics 14mm Bottom O-Ring

Injector Dynamics Viton 14mm Lower Adaptor O-Ring (Black Bottom)

Injector Dynamics 15mm Bottom O-Ring

Injector Dynamics Viton 14mm Bottom O-Ring

Injector Dynamics Viton Bottom O-Ring (WRX-16B)

Injector Dynamics 16MM Bottom O-Ring (For old style WRX Injector)